By Admin
2025-05-04 02:01:01
RJ45 Cat6 Connector Guide
RJ45 Cat6 connector is a standardized interface component designed for Category 6 network cables. Its core function is to achieve the stable connection between Gigabit network devices.
RJ45 stands for: Standardized 8-bit modular communication interface, consisting of a plug (crystal plug) and a socket, following the IEC 60603-7 international standard.
Cat6 stands for: Category 6 network cable uses Gigabit Ethernet as the mainstream transmission medium.
This Cat6 RJ45 connector is designed to connect flat Ethernet or 8P8C phone cables to the PC.
The connector contains two metal "teeth" that hold the wires in place for a reliable connection.
These connectors are easy to connect to the PC and can be used for custom-length cables.
What is the difference between Cat6 and Cat5?
| index | Cat5 | Cat6 |
| Transmission rate | Maximum 100Mbps (theoretically supports Gigabit but limited in distance) | Standard support 1Gbps (support 10Gbps within 55 meters) |
| bandwidth | 100MHz | 250MHz (2.5 times higher) |
| Gigabit transmission distance | ≤55 meters (1000BASE-T protocol support required) | 100m full distance stable support |
Purchase suggestions
Cat5 applicable conditions: limited budget, network below 100 Mbps, short-distance wiring requirements.
Cat6 must-have scenarios: Gigabit and above network, full-house smart home coverage, network upgrade plan for the next 5 years.
If you need to customize this RJ45 Cat6 connector harness, please contact us.
